T150-901307

T150-901307

Micro Motion 1700/2700 field-mount transmitters are powered by MVD Technology and designed for compact integral mounting, or to easily mount on a wall or pipe stand.These transmitters feature a rugged Class I, Division 1 / Zone 1 housing with an optional local operator interface designed to make flowmeter access easy. Flowmeter commissioning is simple and straight-forward with virtually no special programming requirements. Process issues can be easily identified and resolved with built-in, easy access to diagnostics now including PlantWeb alerts with Foundation Fieldbus 

Features

Type 1700: by HART or digital communication protocol Modbus, output in the form of ma and frequency/pulse output one of the following variables: mass flow, volume flow or standard gas volume flow
, 2700: by HART, Modbus, or FOUNDATION fieldbus PROFIBUS - PA digital communication protocol, to the output of the selected combinations (including ma, frequency and discrete I/O) at the same time the output multiple variables (including mass flow, volume flow rate, gas standard volume flow, density, temperature and driving gain)
Installed, with compact, one way to the sensor, can rotate 360 degrees;Also can through the remote installation options to four line or nine line high accurate sensors
, electronic components using MVD ™ technology
, 1, 1 area (Class I, Division 1 / Zone 1) local operator interface, supports English, French, Spanish, German
In situ instrument, self checking technology
• by SIS safety certification
, there are standard or special update rate to choose from, so as to improve the response time
Self checking, intelligent instruments may be fully check the performance of the sensor
advantage
, the MVD digital processing technology, can be in gas and empty with empty batch applications provide advanced built-in diagnostic performance
In situ instrument, the real self checking can determine the operation state of the sensor, online not interrupt process at the same time, also need not auxiliary reference, so as to realize rapid, operational, and simplify the performance of the check
For bulk and shipment and gas application which has the best ability of two-phase flow measurement
, compact structure, convenient installation, low cost of wiring

 

Model 1700 and 2700 physical specifications
Field-mount housing
NEMA 4X (IP67) epoxy painted cast aluminum housing.Terminal compartment contains output terminals, power
terminals and service-port terminals. The output terminals are physically separated from the power- and service-port
terminals.
The electronics compartment contains all electronics and the standard display.
The sensor compartment contains the wiring terminals for connection to the core processor on the sensor.
Screw-terminal on housing for chassis ground. 

Cable gland entrances are either 1/2”-14 NPT or M20 x 1.5 female conduit ports.
Mounting
Model 1700 and 2700 field-mount transmitters are available integrally mounted to Micro Motion T-Series,
R-Series, and F-Series sensors. They may also be remotely mounted to any Micro Motion sensor. See the sensor Product Data Sheet for details and restrictions.
Remote-mount transmitters include a mounting bracket, and require standard 4-wire twisted, shielded signal
cable, up to 1000 feet (300 meters) in length, between the sensor and the transmitter. Hardware for installing the transmitter on the mounting bracket is included.
Remote-mount transmitters with a 9-wire signal cable between the sensor and the transmitter have a maximum cable length of 60 feet (20 meters). Hardware for installing the transmitter on the supplied mounting bracket is supplied.
The transmitter can be rotated on the sensor or the mounting bracket, 360 degrees, in 90-degree increments.
Interface/display
Segmented 2-line display with LCD screen with optical controls and flowmeter-status LED is standard. Suitable for
hazardous area installation.
To facilitate various mounting orientations, the display can rotate on transmitter, 360 degrees, in 90-degree increments.
LCD line 1 lists the process variable, line 2 lists engineering unit of measure. Non-glare tempered glass lens.
Display controls feature optical switches that are operated through the glass with a red LED for visual
feedback to confirm when a "button" is pressed.
Display functions
Operational
View process variables; start, stop, and reset totalizers;view and acknowledge alarms.
Off-line (specific functions where applicable, depending on option board)
Zero flowmeter, simulate outputs, change measurement units, configure outputs, and set RS-485 communications
options.
Status light
Three-color LED status light on display panel indicates flowmeter condition at a glance. Green, yellow, or red,
either continuously on or blinking, status light immediately indicates flowmeter status.
Weight
4-wire remote mount transmitter 8 lb (3.6 kg)
9-wireremotetransmitter 13lb(5.9kg)
For weight of integrally mounted transmitter and sensor,
refer to sensor specifications.